
膠縫里藏著的“隱形良率殺手”
時間:2026-10-23 來源:http://www.whooo.net/ 發布人:昌盛機械
中空玻璃漏氣、幕墻滲水,八成問題出在膠沒混勻。雙組份打膠機干的活,就是把A料(主膠)和B料(固化劑)按設定比例合理喂進混合管,邊混邊打,比例偏一點,輕則發軟不干,重則整批返工。
Hollow glass leaks air and curtain wall leaks water, and 80% of the problem lies in the glue not being mixed evenly. The job of the two-component glue machine is to accurately feed A material (main glue) and B material (curing agent) into the mixing tube according to the set ratio, mix and apply at the same time. If the ratio is slightly off, it will soften and not dry, and if it is heavy, the entire batch will be reworked.

選型先問膠的脾氣:
Choose first and ask about the temperament of the glue:
硅酮、聚硫做中空/幕墻,常見比例6:1~14:1,精度要穩在±2%以?xún)?,靜態混合管夠用;
Silicone and polysulfide are used for hollow/curtain walls, with a common ratio of 6:1~14:1, and the accuracy should be stable within ± 2%. Static mixing pipes are sufficient;
環氧、聚氨酯灌封電子件,比例敏感,優先伺服計量+動態混合,帶壓力/流量雙反饋;
Epoxy and polyurethane encapsulated electronic components, proportion sensitive, priority servo metering+dynamic mixing, with pressure/flow dual feedback;
膠里帶氧化鋁、石英粉等填料,別用普通齒輪泵,直接上耐磨螺桿泵或柱塞泵。
The rubber contains fillers such as alumina and quartz powder. Do not use a regular gear pump, directly use a wear-resistant screw pump or plunger pump.
現場三條硬標準:
Three hard standards on site:
試機用你自己的膠,不看廠家替代液;連續出膠2小時,混合條帶無花紋、無氣泡;
Test the machine with your own adhesive, without looking at the manufacturer's substitute solution; Continuous dispensing for 2 hours, mixed strips without patterns or bubbles;
流道越短越好,混合頭能熱拆洗,停機自動排膠防固化;
The shorter the flow channel, the better. The mixing head can be hot disassembled and washed, and the machine will automatically drain and prevent solidification when stopped;
溫控別省,冬夏膠粘度差一倍,料桶/管路帶加熱或制冷,出膠才穩。
Temperature control is not necessary, the viscosity difference between winter and summer glue is twice, and the material bucket/pipeline is heated or cooled to ensure stable glue dispensing.
運維比買機器更費心:每天完工用專用清洗劑沖混合管,膠槍停超20分鐘先用A膠頂出混合膠;換膠種建議有效洗系統,不同固化劑相遇會(huì )內部結塊堵管;B組分密封防潮,密封圈6–12個月查一次。
Operation and maintenance are more troublesome than buying machines: use specialized cleaning agents to flush the mixing tube every day after completion, and use A glue to push out the mixed glue after the glue gun stops for more than 20 minutes; The system must be thoroughly washed before changing the adhesive type, as different curing agents may cause internal clumping and blockage of the pipe when they meet; B component is sealed to prevent moisture, and the sealing ring should be checked every 6-12 months.
買設備不是買鐵殼,是買“比例穩不穩、清洗痛不痛、售后來不來得了”。
Buying equipment is not about buying iron shells, but about buying "whether the proportion is stable or not, whether cleaning is painful or not, and whether after-sales service is available or not".
本文由雙組份打膠機友情奉獻.更多有關的知識請點擊:http://www.whooo.net我們將會(huì )對您提出的疑問進行詳細的解答,歡迎您登錄網站留言.
This article is a friendly contribution from a two-component glue machine For more information, please click: http://www.whooo.net We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message
- 膠縫里藏著的“隱形良率殺手” 2026/10/23
- 膠線一停,整條包裝線就癱:全自動封膠先搞懂這三段 2026/10/21
- 雙層玻璃起霧、封邊鼓包?問題常出在產線環節 2026/10/19
- 中空玻璃起霧進水,問題多半出在這道工序 2026/10/14
- 立著裝還是橫著裝,中空玻璃打膠這道工序怎么選 2026/10/12
- 膠嘴這個位置差0.5毫米,中空玻璃就等于白做 2026/10/09
- 中空玻璃廠非常怕“鋁條角不直”:全自動鋁條折彎機先懂這 4 件事 2026/10/07
- 雙組份打膠機:比例對了,膠才不白打 2026/10/05
- 全自動鋁條折彎機,中空玻璃鋁框加工核心利器 2026/09/29
- 全自動封膠線,中空玻璃廠升級繞不開的一道坎 2026/09/24
產品分類Product categories
聯系我們Contact us
- 咨詢熱線:0531-85717458 13705446998
- 公司地址: 山東省德州市齊河安頭鄉企巢工業園
- 掃碼聯系我們:

當前位置:



